hi,

i have a Hotpoint Ultima WM75 Washing Machine.

yesterday the Spin Cycle would not come up to speed, and returned the error refer to manual.

from previous experinence, i suspected the brushes were worn.

on inspection they were worn and changed out.

the machine was run on light load, and spin cycle appears to be ok.

the machine was run on light load, and when spinning up after 1st wash/drain cycle, teh display went blank. when the machine run down the display returned to normal, on rinse cycle1. after rinse complete, machine spun up, dispaly balnk etc, then returned to sinse cycle 1 again.
it appears that the machine is stuck mid cycle.
any adv ise appreciated.

frank shaw, July 2009

has anyone got any idea where to get the user manual downloaed? Ive searhed hi and low and cant get one anywhere!

email me on hhih5 at (sign) talktalk . net (remove spaces)if you have one please?

Heather, August 2009

Hi Jonny Hotpoint
the brushes are fitted correctly, they can only be installed in one direction. This would not account for the screen going blank, nor being stuck in 1st rinse cycle.

thanks

Frank, July 2009

make sure u put the brushes in correctly

johnny hotpoint, July 2009