Toddy asked ... Pdw5048tms saw?    |    Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    Click here to ask your question

Door won't close properly on Hotpoint BF1260 Dishwasher??

Thanks for your swift reply,Foot. By bezel do you mean the steel casing on the door itself? Is replacing the spring straightforward or will I have to buy a new one or, has it just slipped out of the mechanism and needs to be popped back in? Thank again in advance, Foot!
Phil.OK Dublin, August 2009
sorry, when i say the bezel, i mean the control panel with the timer in ( normally plastic ) the lock is inside behind the bezel, the spring normal breaks, if this has happen then you will have to replace the interlock assy or if not you may be able to click the lock open ( with the door open you should be able to see the slot at the top of the door - get two small flat bladed screw drivers and try to hook the catch and pull towards you, this will save you time, otherwise you will have't to take the bexel and front door metal outer panel off to get access. if interlock is u/s they are a cheap part. hope this helps

foot, August 2009
link Click here to see other fixes for Hotpoint BF1260.