Close-up Photo reqired of Bosch SMS69L02GB/02 PCM?
Close-up Photo reqired of Bosch SMS69L02GB/02 PCM?
Hi
A resistor on the PCM of my Bosch SMS69L02GB/02 dishwasher has blown. I can't see any of the writing on it to be able to replace it with an equivalent. Does anyone have a close-up pic that would allow me to identify it?
The resistor is sandwiched between an HF3FD relay and a blue VDR.

Many thanks

steve2232, September 2009

Are you sure it's a Resistor - unless they're very special resistors do not usually have writing on them - they usually have colour (color) bands to identify them.

Are there any visible markings on the component at all?

The "resistor" or whatever it is, has failed either on its own or because a fault somewhere else in the machine caused it to fail - components that "burn-up" seldom do so spontaneously - a resistor will discolour over time if the Wattage rating is too low, else a fault caused it to take too much current - i.e. replacing the component may not necessarily solve the problem.

Good luck...

Peccavi, September 2009