Ok, something went down into the dryer where the lint trap is, and now it's not running. The timer will still go, but there's no heat and the drum isn't spinning.

Athena, March 2006

Hello,

Here's what to do. Remove the 2 screws toward the bottom of the front panel and lift the up so it releases at the top. You can just lean it against the side, no need to disconnect the door switch. Now, remove the 4 screws that were behind the front panel and take this panel and put it aside. You will now see what's jammed in the blower wheel on the left. Hope this helps.

JP, March 2006