i have a Bosch SGS53C12GB/21 dishwasher, & when you put it on, it works, but it dont stop, just keeps going, is it the control module? & how do i replace it?

John Marsh, October 2009

Hi thanks for your quick responce, do you know how i would check to see if the control unit & the heater are faulty ?, the heater should have an element so i can check the resistance of that, i could do a visual of the circuit board to check for dry joints, any help would be great
Thanks John

John, October 2009

its eather the control unit or the heater. it keeps going because its not reaching the selected temp.to replace the conrol unit unplug it from the power supply.now remove the screws in the door and then the screws to the control panel remove the panels then look at the botton of the control panel there are 4 clips that hold the outter panel to the metal backing plate two in the middle and one in each corner.remove the outer panel then unclip the control unit.
now clip in the new one and then unplug the wires one at the time and plug them into the new one.

baldyjoe, October 2009