i have power to machine but when i press start the code LD comes up on the panel what does this mean

dreamlass, October 2009

It seems the agitator is only going one way and twisting clothes around the agi. I have heard about a clip coming off could cause this. Could you please shed some light on the issue.?

John, September 2017

Does it cost much to have someone fix a of on a Simpson exist 605

Aniqwa, July 2015

hi my ezi set 605 is leaking water from the center and i have got it in bits and can see where it is leaking from but have trouble geting the center out looking for a manaul on line

adrian, October 2010

LD means lid is open. These machines have a proximity switch located in the left side of the top deck just beside the left side of the lid. There is a magnet fitted to the lid which operates the switch when lid is closed. Sounds like you need a new lid proximity switch fitted. The wires from the switch go into the panel & connect to the control board & pressure switch. Unless you are capable & confident enough to do it I suggest you get someone in to change the switch.

Lincoln Appliance NZ, October 2009