My Indesit Evolution 1000 WE10 will fill up and drain but the drum will not turn or spin, it makes the sound as if it is going to spin but nothing happens. Can anyone help i'm desperate!!!

Vikki Lowdon, October 2004

you probably got bra wire stuck , which went through the whole and it's prevent it from turning check the drum.

urkiye dervish, September 2006

it sounds like the motor is starting ok from what you say,
when there is no loads in the drum see if you you can rotate it.
if you cant rotate it fairly easy then the drum or drum and shaft bearing is probably the cause. Hopfully the drum is ok if this is the case then the moter to drum drive cabel is broken or has come away from its pully. If this is the case then replace the belt or put it back on its pully. its located at the rear of the washer, you just need to remove the back plate. it has about 6 screws, you will easily see the belt path

jonathan C, January 2005