can anyone tell me in laymans language how to "flash" my starview box,I have the cable to connect to my pc, have looked on keymaster but am too thick to make sense of it. Thanks for any help.

Tel, October 2009

hi i have a problem my starview box needs flashed i was given the wrong programme and its froze i cant do anything with it can someone please help

delbhoy65, September 2010

thats ok , if your in the uk your fine , its not realy hard to do , i have done lots of models , you can get step by step , on how form www.afterdawn .com good luck .......

mick, October 2009

Thanks a lot mick, going to have a go at it in near future, I am in NE England so should work ok, thanks again.

Tel, October 2009

Thanks mick, got all that, which website do I need to go to and how will i know what file to use.

Tel, October 2009

ok laymans terms , if there is such a thing..... first of all , if you look at the back of the starview box , you will see a port , marked (rs232) it takes a 9pin male lead , that links the box up to the pc , via a nullcable lead" NOW , you must have a pc/labtop with the (SAME) rs232 port on it , or you cant flash the box, because , you go on line and get this file from a website, save the file to your desktop" then you send the file down the cable into the softwear memory that is in the starview box , , so you must have the same ports on the pc/ laptop to start with . so take a look .......

mick, October 2009