Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    Click here to ask your question

how can i re program my key fob for a 2001 ford transit?

how can i re programe my key fob after changing the battery in it for a 2001 ford transit
mart, October 2009
FORD Transit (2000.5MY) - Remote Key Programming

1. Close all the doors.

2. Turn Ignition key from position 0 to II eight times within 10 seconds.

3. Make sure the vehicle locks and unlocks the doors.

4. Press the remote transmitter button within 20 seconds., and make sure the vehicle locks and unlocks all the doors.

5. Up to 20 seconds is allowed to programme the next remote transmitter.

6. To programme additional remote transmitters, repeat steps 4 and 5.

7. Turn the ignition key to position 0 to exit the programming mode.

Note : Maximum 4 remote transmitters may be programmed.

Note : . Ensure the vehicle battery is fully charged and the anti-theft alarm system is not armed or triggered.

Note : If programming ends with no new remote transmitters, the originals are retained.

Note : The anti-theft alarm and double locking module will exit programming mode automatically if four new remote transmitters have been programmed or if no new remote transmitter has been programmed within the 20 second programming mode.

Taken from

http://www.programyourkeys.com, very good site.

astragal, October 2009
link Click here to see other fixes for Ford.