lol yeah that resets the faults but doesn't fix it.....
F6 is usually not filling with water. If you can see and hear water going into the machine the problem is that it can't DETECT it is filling.
This fault is usually caused by a plastic reducer which sits behind the inner door hinge on the outside of the drum, the reducer has a small rubber pipe leading up to the control panel and can snap easily. To repair it you need to remove the front of the machine to get to it, remove the snapped section from inside the end of the pipe then force the pipe back onto the reducer and secure with a tie wrap/zip tie.
I know this because I've done it.
Wacky77, June 2011
