Dot asked ... Russell hobbs?    |    Jon asked ... How do I remove the flywheel. Mountfield 1640h ride on mower?    |    Keith Mumby asked ... Fordson starter solenoid?    |    Suzanne asked ... Washing programme stops after 3 minutes?    |    Rif asked ... Kenwood Dishwasher KID60S20 leaking from front?    |    Click here to ask your question

AEG Lavamat 50430 control panel?

Help! does anyone know how remove the control panel facia on this washing machine? I have removed two screws on the top and two screws behind the soap tray, but the facia is still attached on the right hand side.
Frank, November 2009
Thanks for that Mike - easy when you know how! I need to remove the facia to access front panel to replace the door seal. BTW any suggestions for shifting the torx bolt on the drum drive wheel - it's **** tight. Needs a new bearing.

Frank, November 2009
From the top...look at the back of the facia on the right hand side. Either 1 or 2 plastic clips (can't remember which) sticking through the metal plate. You need to push slightly to release the facia.
BTW...why are you taking it off?

Mike, November 2009
link Click here to see other fixes for AEG.