We have a washing machine Ariston ALD 120. But regularly we get the error code F-08. In the documents of this page it says that there may be problems with connector J3 or the pressure switch. Can you tell me on which position (where in the machine) can I find the J3 connector and the pressure switch?

Erik Schönherr, November 2009

Hey Mike,
Thank you for your reply.I don't know if the heater relay will be the problem because the error code is almost in the begining of the process , far before the water has to be heated. But the problem is intermittent. Maybe the heater relay have problems with some vibrations. So where can I find that heater relay?

Erik Schönherr, November 2009

What are you going to do with them if you find them?
Pressure switches are either good or no good...there is no in between & they rarely fail even if it says so in your book. So your problem is likely to lie elsewhere.
J3 refers to a plug port on the PCB. If you want to see where the pressure switch lives take off the lid & look for a brown circular plastic device with leads on the top & a black rubber hose on the side (or bottom depending on the type). Unless you are familiar with these devices all you'll be able to do is look at it.
BTW...F08 points to a possible heater relay problem.

Mike, November 2009