Would appreciate some help with this one .. im on my second F&P washer this one has just developed a fault where it runs for a few moments and then constantly beeps.
I have put mashine into diagnostic mode and still get the same indicator lighting up on the wash progress bank. (second one on from left) I am led to beleive this is Binary "2" it seems to pump ok , i have some spares from previous donor machine - just cant figure the code.. any help welcome .. Frase

Frase, November 2009

Can you confirm that the error light is the 2nd one from left while looking from the front of machine. If so then that is error code 64. The binary numbers are read right to left. 128-64-32-16-8-4-2-1(spin)
Error code 64 is an error with the pressure sensor on the control pcb. It is giving incorrect vaues to the controller. You will not be able to repair the sensor. It means having to change the whole controller. If you plan to use parts off the old machine you must check that the parts are compatible. Post the old machine model number back here & I will let you know if you can use the part.

Lincoln Appliance NZ, November 2009