I have an AEG Lavamat W 1050 Electronic Washing machine. It stopped pumping out the water last week so I had the pump replaced. It does now pump out the water - eventually - but it stops after the wash action and perhaps one rinse (the conditioner does not get taken in).The alarm sounds continuously after each part of the cycle. I have to restart the machine on rinse and again on drain and spin. It takes ages to finish. The alarm sounds after each action. Help please!

Gina, December 2009

my machine has stpped working in the middle of a cycle. How do I open the door of the machine, take out the "dirty"washing and How do I drain the water?

Lesley, September 2013

if it doesn't drain within a set time problems arise.you say it eventually drains which to me means that you have a flow restriction from the pump to the outside world.get the drain hose and put it in a bucket and with a full tub of water it should come out in a solid flow of water with plenty of pressure.if not this is your problem.could be blocked at the back of the filter.shake the drain hose hard and then drain again and see if any dirt comes out.blowing down drain hose can sometimes help to unblock.check filter

ck, December 2009