Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

my bt studio 3100 keeps flashing base 1 ?

my bt studio keeps flashing base 1 and will not let me set anything up the other phone is working fine but not the main phone
Carol j Large, December 2009
i have tried this so many times and it hasnt worked at all. My handset does nothing

matilda, December 2014
Excellent concise answer. Thank you.TIP ! Don't let any child (especially 1 year old inquisitive grandaughters) play with this phone !

Charlie Goodfellow, February 2014
Thank you so much Killer Heels, thought I would have to buy new phone. Worked first time.

Hayley B, January 2014
THANK YOU!!!!! This is the only solution I found online that actually works - just saved me a new phone, thanks a stack!

Beal, September 2012
thank you so much this was driving me MAD but it worked after the second attemp x

abbie scott, November 2011
Thanks Killer Heels - worked!!!!

RH, August 2011
killer heels.. u r amaaaaaaaazing... my daughter played with the headset and i was just about to go and buy a new one .. but ur way worked like magic .. thanks million.. thumbs up

sA, July 2011
Thanks Killer, Your described solution above worked very well for me.

Thanks a lot.

AH, May 2011
Thank you to the above person - all sorted as had the same problem.cheers again

GJ, February 2011
Hold the Find button on the base unit until you get a double beep then tap the Find button 7 times. This re registers the base. then move onto the handset:

remove a battery

hold the menu key and refit the battery

screen says SW VERSION

press up arrow key until screen shows REGISTER CLEAR

press menu

press menu again and wait for OK to appear

remove a battery and refit.

Then register the handset to the base as follows:

Hold Find button on base unit until you get two beeps

On handset:

Press menu

Scroll to register

Press menu

Scroll to Register Base

Press menu

Press 1

Wait

When it says PIN ? Enter 0 0 0 0 (four zeros) and press menu

Killer Heels, September 2010
link Click here to see other fixes for BT.