GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

My Hotpoint washing machine keeps flashing H20?

I have a problem with my Hotpoint WF740 Aquarius washing machine. It keeps flashing H20, (error sign), and is overfilling with water and does not appear to know when to stop.

Excess water is flowing through the soap dispenser draw onto the floor???

Does anyone know how I might fix this problem please?
Mary, December 2009
keeps saying h20

angela diane ginns, April 2022
OK, so having read through all these I managed to get an idea of the cause of the problem, blocked outlet pipe, so I pulled the machine out and the outlet pipe had a huge lump of ice around it! Once we had gently heated, by heating the kitchen (we had been away for the week whilst temperatures held at a minus figure all week) the ice melted and the machine now works fine.

David Cavanagh, March 2018
When switching on my Hotpoint WF541 all the lights flash non stop for about 2-3 minutes.

G Smith, October 2016
Hi my Aquarius shows h20 can you tell me what this means

Sarah, July 2014
Water supply hose had a kink in it where machine was pushed back into its space too hard

Roger, March 2014
I have a hotpoint ultima 7kg machine and it will start to fill, then just sit there doing nothing for about 5 mins, then flash the H20 sign and start to fill again. it will then complete the cycle fine.

how can i fix this please?

Ann Garrett, August 2013
my washer is saying h2o on the hotpoint f760 what do i do

jo, April 2012
Hi I had same problem with my hotpoint flashing H20,i did how Jim sad and problem solved,that mean clear pipe was disconnected on back of soap dispencer ,connected back and working normal.thanks for help

luc, February 2012
wf740 error code h2o, checked marys advice about the clear plastic hose. low and behold, there it was just hanging there. reconnected it, everything back to normal. this is a vacum pipe and will cause all sorts of problems. thanks very much.

902colinl, March 2011
I had same problem:

Removed lid and found a clear plastic pipe at rear of soap dispencer had come away from its connrction. Simply pushed back on and problem solved!

Jim, January 2010
Me too Mary! Exactly the same. I am trying to find out what H20 means!! Another Mary - are we fated to meet!!

Mary, December 2009
link Click here to see other fixes for Hotpoint Aquarius.