Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

ALPINE SAT NAV. AS FITTED TO 2003 BENTLEY ARNAGE?

READING UNIT WOULD NOT READ DISC - NEW READER UNIT COMPLETE FITTED - NOW REMOTE CONTROL UNIT WILL NOT OPERATE SYSTEM ALTHOUGH SCREEN INSTRUCTS ME TO CONFIRM SELECTION OF LANGUAGE [NEW BATTERIES HAVE BEEN FITTED TO CONTROLLER AND RED LIGHTS FLASH WHEN BUTTON IS PRESSED
FRANK CRYSTALL, December 2009
There are two possible problems here. I had a similar problem with my 2004 Bentley Arnage. My problem was that the terminal contacts in the remote had corrosion build on up on them. Enough power from new batteries to light the light on the remote, but not enough power to effect the unit in the dash. Mine also works only the Navigation system and not the audio head unit for some reason. Changes are, there is a frequency setting required somewhere between the two various units and the remote and one or more is likely out of sync in your case, likely due to the replacement.

G-Man, February 2010