narnia asked ... Matsui ct-111ss?    |    Jason asked ... How to fix handset problems ( intercom ) and access control?    |    andy asked ... Samsung VP-D60 camcorder?    |    Shopper asked ... Poor Renault Radio Reception?    |    reg bardle asked ... Lg 7kg dd?    |    Click here to ask your question

hot water and pressure?

Why when i am running a bath i have to have the tap just open enough so the water just trickles out so that it's hot. I have noticed that when i do this the pressure gauge goes from 1.5 bars to 2.5 and does not return back down to 1.5 bars can any body help
ken, December 2009
could it be the three way valve leaking into the heating system to make the pressure in the rands go up by 1 bar

ken, December 2009
plate heat exchanger needs cleaning out then for a guess

b, December 2009
they changed a spring something was not popping out properly

ken, December 2009
they changed the diverter valve

b, December 2009
It did do but had that done about 2 days ago by british gas

ken, December 2009
no heating off

b, December 2009
This is with the heating on

ken, December 2009
when you run the hot tap does the heating flow pipe get hot
its the 22mm pipe on the left

b, December 2009
It's a baxi combi 80eco installed in 2001

ken, December 2009
sounds like the plate heat exchanger needs looking at
what boiler have you got

b, December 2009