How 2 Fix Fisher & Paykel Smart drive 9 Pride 5.5 ?
Its not filling properly or spinning out.Its puming water out in little burts & starts beeping.
Ive cleaned the hoses checked the pump.
The pump was replaced a year ago.
Reading from the left to right the lights that come on are the 3rd 5th 7th & 8th.
It sure pays to get advice for those who know what they are talking about. I had the same problem and found the microswitch corroded. Replaced and all good. Thanks heaps.
Longboy, February 2010
Thanks for the help very much appreciated
Franso, December 2009
Fault code 43 is out of balance switch problem. This is located inside top panel on right hand side underneath the motor control box. The microswitch will probably be corroded. Replace it.
