followed advice on these pages heating the three caps and the tv worked fine
now decided to actually replace the 3 caps
could only get 1000 microfarad in 35 volt form
now tv starts straight away but picture seems to pulse
(ie goes bright then dull every second)
could it be this diferrent voltage on capacitor or maybe i havnt soldered all tree correctly(the 100 microfarads are correct at 25volts) please help me

ivan, January 2010

the caps have to be exactly the same value hence the pulsation !! u can and should go for higher voltage values so as to give some more margin of their possible future failure
the caps u have used are the wrong replacements use same value microfarads as originals !!!!

Les, July 2011