Not a question - just a bit of advice - if its not firing up check that the condensate pipe not frozen up if its mounted on the outside of household or area subject to v low temp - look for plastic pipe exiting and discharging to gulley / - i borrowed a hairdryer to get things going / hit the pipe a 100 times to break ice within pipe -I then decided to remove as pipe v long and almost horizontal - in the manual it will advise hot water / wrap around pipe - therefore choose ur own method for thawing out / i put hot water tap on to get burner firing up and when u start to see a trickle u know ur getting on the way/ - i couldnt get the ch working but working on it as diff prob

eddie, January 2010

my outlet pipe also freezing up. took lagging off and used boiling water from kettle, then re lagged with new. was getting ch but when you want hw you get it and then the ch goes off?? repair man said it was common problem. thinking about putting on a larger bore outlet pipe during this cold spell if it continues.

nicjb, January 2010

thanks again erj
seen some info regarding the gas govner - but if hot water ok would the govner be ok?or is it related to the gas to the CH - regards

eddie, January 2010

we have had a lot of the same problems, also had one to day where the govner on the gas meter had frozen up had to get transco out,

erj, January 2010