Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

how do i input the code into my radio ?

my vauxhall zafiras radio code needs to be reset but i dont no how to do this pleases can you help
marjie, January 2010
To enter VDO radio code, power off the stereo, switch on your ignition, press and hold the "AS " button and switch on the radio.
The display should show " SAFE " and then show " 10 _ _ _ _ "
If the word SAFE " does not clear then you will have to leave the radio powered on till the display shows " 10 _ _ _ _ " (maybe 2 hours).
Now press program " 1 " button repeatedly 'till 1st digit is correct.
Now press program " 2 " repeatedly.... and repeat 'till all code is shown on your display press and hold the " AS " button until the radio beeps, your radio will now activate. If your radio does not activate then the orignal vdo radio code may have been re-programmed!

Slick, January 2010
link Click here to see other fixes for Vauxhall.