GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Beko washing machine leaking from underneath?

Beko washing machine (just over 12months old) fills good but then leaks water out from underneath. Checked door seals and they are fine, any help would be appreciated.
sammy, January 2010
Lamona 8631: Has been working OK for over 3 years but today, water pouring from a square hole at the top of the regeneration tank (behind LHS left side panel) when the dishwasher fills with water. When filling stops, the level in the regeneration tank lowers (water stops flowing out) and the machine works very well. I am very puzzled! HELP PLEASE. P.S. If I put my thumb over the hole to stop the water - no adverse effects as far as I can see)

Tim Rollinson, July 2017
Our machine is 18 months old. Water gushes out as soon as we start the washer.

Sue, April 2016
Mine was the same & topper turns out that the stopper on the black hose leading from the dispenser had came out Cost £2.50 for a new one

lainy, October 2013
leaking from pomp the small pipe sticking out not the inlet nor the outlet

steve, September 2013
Leak at the front left of the machine. Turns out the drainage pipe was leaning against one of the struts for the drum. This caused the drainage pipe to wear and a small hole in the drainage pipe was my problem. Cheap and easy fix thank God!

Dave B, May 2011
beko washing machines are a waste of money save ur self the trouble and buy a new one

lolo, September 2010
I had the same problem. I took off the back and the top of the machine(unscrew top and gently prise off). I then turned the machine on and took it through its cycles one by one. The leak began very gently straight away and came from under the drum. I drained the water. All dispenser and pump connections were fine. After leaning the machine to one side I noticed a small black wax like plug on the plastic side of the drum. The water was coming from there. I took it off and there was a hole there. I filled it with silicone sealant let it dry overnight and ran the machine again. It fixed it.
I fear the plug was put there when the machine was made. A form of planned obsolescence!! (2 years). Am I being cynical!!!

Ivan, September 2010
Exactly the same on my machine, a Beko 5100 and its 2 year old. Will check the dispenser, thanks

Paul M, April 2010
mine has just done this today and i checked door its fine hoses fine too and mines beko but 13months old

louise, February 2010
look underneath and find out where it leaks,if the leak is on the front left corner there is a good chance that the dispencer to tub hose has chaft and split

ck, January 2010
link Click here to see other fixes for Beko.