andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

I have a DIPLOMAT ADP 8312 dishwasher that will not run a complete cycle?

This DIPLOMAT will not run on any cycle and cuts out after about 10 minutes. When opened it displays one flashing (DELICATE) and one constant light (the setting it is on). When switched off and on again the two lights furthest on the right of the 5 lights illuminate which I assume is an error code but I know not what for. I've checked the salt and that is fine and I've checked the water filter and all is fine. Any one out there help?
Andy, April 2006
some diplomats have a safety cut out in the bottom like a float switch if it has leaked or over filled the water will have collected in the drip tray and activated this stopping the machine filling, have a look if there is water clear it out and try resetting please remember to turn the power OFF before looking in to it

daz, May 2006
Help - I have a similar problem - any help would be appreciated

kerry, April 2006
the manual says that the safety switch has tripped because of too much water. same problem as me but i can,t get it to reset either. don't know where this switch is !

stig, April 2006
link Click here to see other fixes for DIPLOMAT ADP 8312.