can someone provide the wiring diagram for this dishwasher? It no longer runs at all, completely dead. As if there's no power, however I checked this and power is coming in to the first terminal block. Any suspect components?

Marty, January 2010

wow Jim... not sure if that problem occur frequently but that was exactly my problem... thanks for your help!!

Antonio, January 2014

Jim,
Excellent answer! After replacing the door switch to no avail I took your advice. The plastic sleeve was cracked and the black power wire was nearly completely severed. I replaced the entire wire with a new terminal end (auto parts) and threaded the wire back thru the sleeve. I also added a layer of black tape to the wire. Perfecto!

datatrader, October 2013

check the black wire from the terminal block to the switch, it may be broken inside the plastic sleeve that passes under and into the door. Requires removing the door front panel and the brace bar inside the door, unplug both end and test for continuity, if it's broken you can take it out reverse the direction that it runs and splice it inside the door.

Jim, January 2013

We are having the same issue as well. Dishwasher will not start. Once we figure it out I will post the answer.

J & M, January 2011