Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

How to reset a code on my Samsung Dishwasher DMR57LFS?

My new dishwasher is flashing a code: LE for leakage. It is a brand new Samsung model DMR57LFS. Opened the dishwasher while it was running and when I shut it, it started flashing this "LE" code.
redrat, February 2010
I have a SAMSUNG model DMR57LFS flashing an LE code. It ran for an hour then started to leak. Saturated a throw rug then stopped with an LE code. I had it fixed ($300) a year ago but it is back again. How do I turn the flashing code off. katie: turning the dishwasher upside down is not an option for me. If I can't fix this myself then I will buy another brand.

snowquail, January 2018
Is there something you can do to bypass the LE code ?

Stacey, September 2017
did you ever get an answer to your question, I found the answer once and can not find it again, like they don't want us to have it?

Sam, February 2017
I have a samsung waterwall dishwasher modle 80 and the error code 5E whish is drain hose kink or pluged . Removed the dishwasher and neither the hose or drain is plug as well i cleaned the drain screen which was not dirty how do i clear the error code so the dishwasher will start i have unpluged the power it several times and still cant get the washer to start- is there tow buttons that i need to hold down to clear the code?

Steve, July 2016
I have a Samsung dishwasher, it starts out fine then acts like it drains the water then there is no water and does not go to fill cycle before it drains and then the auto and heavy lights flash then it acts Luke's it draining and shuts off and flashes

Kathy, June 2016
I have a Samsung dishwasher it starts out fine and then acts like it drains the water but there is no water and does not go to fill cycle before it drains and then the auto and heavy light flashing when it's time to fill with water and and makes a sound then shuts off and blinks

Amy, October 2015
I second the previous comment. There are loads of sensors on this DW, but this is the one that you need to fix to remove the LE code. Much easier than a 250.00 10 minute service call.

squeegeeman, December 2012
Thank u so much for posting this easy solution. Fixed us up quickly.

Tag, November 2012
THANKS! worked great after taking the bottom plate off and drying

katie, September 2011
I had the same problem, SAMSUNG did not want to tell me how to fix so I jumped in with research I found that after you remove the power supply, i.e. plug, 1) you need to remove the dishwasher and turn it upside down. 2) There is a white sensor tray; 12x12 approx. ont he bottom held in with two screws, remove the screws and use a flat head screwdrider to undo the clips holding the tray in place. 3) Dry the tray and sensor tips with a towel and replace the tray. Bammmm, you have just fixed the LE code error. Why is it so hard for SAMSUNG to tell us this.

SAMSUNGHATR, February 2010
link Click here to see other fixes for Samsung.