ive tried everything exept the matrix ...... the cooling system workes fine but the heater just blowes cold ???? is there a way of checking to see if its blocked before i take out the dash ?

keith, February 2010

many thanks .. i have just removed the top hose from the engine side and put the hose inside and flushed .... there seemes to be no resistance and the water flowes out of the engine side !!!! when the engine is running both hoses seem to get hotter than the rad ones but there is only a slight bit of warmth out of the blower ??? the engine temp stayes about 85 any ideas most appreciated

keith, February 2010

take off both heater pipes going into bulkhead and put hosepipe through top one on a fast flow setting and see if water comes out of bottom pipe. might be all brown and rusty.

me, February 2010