my washing machine is goin through cycle but not spin dryin clothes properly

jason, March 2010

hi my washer fills with water then nothing happens, it was making a strange noice the last time i used it

stuart, January 2012

my indesit wib 101 spins but on the final spin it cuts out the electrics and trips the fuse box .

pete, February 2011

the belt keeps slipping? any ideas? new belt has been fitted.

tony, September 2010

Worked for me.. Thanks.

Jon, August 2010

my indesit flashes 10 times and does do a cycle

ian, June 2010

are the black connectors on the wires or the motor

pip, May 2010

are the black connectors on the wires or the motor

pip, May 2010

i cant see them

pip, May 2010

i cant see them

pip, May 2010

where are the brushes situated on the wib101

pip, May 2010

where are the brushes on the machine

pip, May 2010

Hi, sounds like the carbon brushes on the machines motor are worn? tilt the machine underneath you will see the motor with a pulley belt on the end, where the wires go in to the motor you will see 2 black plastic connectors on each side? pull off the connections and remove each one with a round headed screw driver? 2 screws per connector? then pull it off!on the end is the carbon brush? this is what needs replacing? buy a new set and fit them back with the screws, be carefull not to snap the carbon? this completes the repair regards mark. click here for spares http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190322810333&ssPageName=STRK:MEWAX:IT

mark brand, May 2010