andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

bike pump to expansion vessel?

were do you attached the bike pump to the expansion vessel so you can fill it with pressure
sharron, March 2010
its at the top of the pressure vessel, so you will probably have to stand on a chair to see it, if you depress the pin and it hisses you probably dont need to pump it up, a can of worms could be opened here because to pump up the vessel you need to open the pressure relief valve and leave it open to pump water out of the expansion vessel, but the relief valves very often drip or totally let by once they have been opened forewarned and all that

john, March 2010
Hi, I can assist with this one we had exp. vessel fitted recently. At the end of expansion vessel (opposite pipe fitting) you will find bike valve, remove dust cap and pressurise 0.5 bar(about 7psi) Good luck

Thom Hall, March 2010