3 lights are on inside on my integrated fisher paykel dishwasher. the heavy wash, the fast wash and the rinse. also on the outside panel the wash button is blinking grn and yellow and the lock button is blinking red. I ran it through a cycle to see if I could reset it and now there is water in the bottom, it didn't drain all the way. I need a list of fault codes for the integrated model. The list in the manuel is incomplete. I also need to know which buttons to push to drain this model. DD6031

Kimberly, March 2010

could be a cinck in the pipe at the back of the draw

helen, March 2010

There is no fault code which has Heavy, fast & rinse lights all showing together. Closest is Heavy & rinse lights only. If yours shows 3 lights then I would suggest that the control board has a fault & would need replacing. To drain just press pause then press power off on panel. It will automatically drain after a few seconds. If it doesn't even try to drain then again the control board is faulty. You could try a reset by turning power off at wall plug for several minutes then put power back on & try.

Lincoln Appliance NZ, March 2010