set up as normal push go button water comes in intermittently for a few seconds at a time - after a minute or so it beeps and shuts down- solenoids are fine even swapped them no problem - filled machine manually and restarted agitated a very tiny amount each way then shut down, all lights come on normally and everything seems to be in order

Bruce Williams, April 2010

Mark & Bruce you both have the same error code 43 which is a faulty out of balance switch. This is located under the right hand side of the control box inside the panel. It will be a microswitch with 2 wires attached and the switch will be corroded. Replace the switch.

Lincoln Appliance NZ, April 2010

our machine has stopped working and a it beeps then on the top row the lights come up from left to right as off-off-on-off-on off-on-on.what might the problem be any suggestions would be great thank you

mark, April 2010

from left to right including long wash 8 lights - off-off-on-off-on-off-on-on Thankyou not sure if this is right section to reply in

Bruce Williams, April 2010

What error code is showing when it beeps? exactly which lights are on & which are off along the top row counting from left to right.

Lincoln Appliance NZ, April 2010