Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

wat 2 do after entering the code on a blaupunkt radio cassette?

after entering the code it says wait 1 h then code again then it says wait 1 h wat do i do it is a blaupunkt radio cassette serial no xqd 000390puy or bp216132081527
stephen, April 2010
wat is the a s button

stephen, April 2010
Your keycode is: 8233

telebumm007, April 2010
hi steve your code for that bp number is 8233

BASIC INSTRUCTIONS TO ENTER A BLAUPUNKT RADIO CODE
Switch the ignition key ON
Press and hold AS button * and the ON button at the same time
Display Shows SAFE then goes to 10 - - - - with a "Beep" from the speaker
Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed
If the display now shows the correct Code number then
Press Button AS and hold to Enter and if successful there should be a
"Beep" from the speaker and the radio should switch on


press the first preset button 1 for the 1st digit, followed by (station +)
second button for the 2nd digit followed by (station +)
third button for 3rd digit followed by (station +)
forth button for 4th digit followed by (station +)
then press (station+) to store

hay88, April 2010
link Click here to see other fixes for Blaupunkt.