Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Click here to ask your question

my service light is on?

how do i remove my service light on dashboard after a service i have transit 260 swb 2000
stewart, April 2010
Turn ignition to position 2. Press brake and accelerator down together for 15 seconds service will flash when complete turn ignition off.Do not short out any wires as you may damage your ecu.

Raz, April 2010
thanks for your reply unfortunetly this did not work i was told by a mechanic that i had to get some wire and attach to certain part of engine and short it out can anybody else help me thanks

stewart, April 2010
Hold brake and throttle pedal down at the same time,switch on ignition and keep holding pedals down for about 10 seconds,spanner light should start flashing,switch off ignition,foot off pedals and that should be the light reset,good luck.

wickham, April 2010
link Click here to see other fixes for Transit.