Each selection is sticking half-way through.Vinyl is fine , stylii fine , what's up?

steve cox, April 2010

I have a city 2 juke box, generally in v good condition but the 2 tweeter speakers on top work perfectly all the time but both base speakers cut out during play or simply fail to work, is it the crossover, and where is that Chris

chris, January 2022

hey steve, more than likely the operating switch is not set correctly. the switch is mounted on the inside right bottom of the carriage. if you loosen the screw on the outside of the carriage and pull the top of the switch to you and then tighten it up you should be ok. if not then the needle brush may be your problem. is it sticking only on theleft side of is it both sides?
let me know.

george sammons, November 2012

how do i remove the bass speakers in a nsm city 2

ant, December 2010

Hi, here's a few things to check.
The fine wires to the stylus could be caught around the weight on the bottom of the tonearm.
The small springs each side for the tonearm not set.
The arm return plate on the left may not be high enough
because the operating switch is not set right.
Hope these help.

Martin, April 2010