Does anyone know what error code -con on Ariston Model AIB16 Advantage?
means. The washing machine shows this on completion of the program instead of end.

Bob Masters, May 2006

f3

adn, February 2010

f 02 means connection between motor and module is loose or corroded

mark taylor, June 2009

I had the same - there's a conductivity sensor that sits attached to the pump area. The conductivity lead runs from the top of the machine to the botton. Mine had come off at the bottom. Bought a new connector, crimped it on, plugged it back and it's ok

Mike, April 2009

I have cured the -con error myself. I had to take the pump off as I also had an F05 error which means the filter is blocked. I cleaned up all the inlets and outlets especially the smallest one as this seemed to be blocked with limescale. After refitting and running the machine now properly and showing End at the end of the program.

Bob Masters, June 2006