Jon asked ... How do I remove the flywheel. Mountfield 1640h ride on mower?    |    Keith Mumby asked ... Fordson starter solenoid?    |    Suzanne asked ... Washing programme stops after 3 minutes?    |    Rif asked ... Kenwood Dishwasher KID60S20 leaking from front?    |    Fraser asked ... Spares for power craft ppcs 38cc?    |    Click here to ask your question

How do I wire the heating element in my AW1400w?

I have replaced the heating element in my Tricity Bendix AW1400 W washing machine, but did not note which wire went to which spade connector (there are two). Maybe it doesn't matter but would like to be certain. The element would be standard across a range of machines.
Andy East, May 2010
On an element is does not matter which wire goes to the element spade terminal but you will have a 3rd wire which is green or green/yellow which will be an earth wire that must go on the earth tab and not on the heater tabs. The earth tab is usually in the centre and can be clearly seen to connect to the outer metal sheath of the element.

Lincoln Appliance NZ, May 2010
link Click here to see other fixes for Tricity Bendix.