how do yo change rear wheel bearing on the van any info welcme

PAUL, May 2010

I find that holding a mechanics wife in a darkened room at a secret location is a good cheap way to have a mechanic fix just about anything really! This technique can be used in many situation's but be warned there are dangers involved....! Mechanics wives are usually really ugly! I should know am a mechanic n my wife is real ugly! I can supply an address if any one want's to kidnap Her. I'll fix anything for a day without having too look at that face!!

Jesus Gonzalez Motigue the 16th, May 2010

don't forget n/s hub nut is l/h thread-also when nut is removed if you fit half shaft the wrong way round you can put wheel nuts on and use to pull off hub [when nuts become tight give shaft a wiggle and it should come off] you should be able to knock bearing out with a drift.by the way hub nuts are octagonal and not hexagonal.

k, May 2010

Remove half shaft,punch back locking tab on big nut and remove nut,sorry cant remember size,hub should just pull off,think you can punch these out,you should get new oil seal and locking tab in your kit,punch in bearing and refit in reverse making sure hub nut is tight,there will be a torque for this and check your diff oil level when done, good luck

wickham, May 2010

Unfortunatlly there is no quick solution, it has to pressed out.

john, May 2010