Hi, as you can see my Newhome 743 (made by Janome) has feed problems. With the sole plate off the fabric will feed through and the machine sews well but with the plate on the fabric goes nowhere. I've looked at previous, similar, questions and tried out the answers but to no avail. I no longer have the manual so don't know if I have differential feed, manual feed or electric feed. It's all greek to me. Any help, in English, would be appreciated.
Thanks

Used to sew!, July 2010

If you tilt the machine back so you can see under the teeth, you may ned to take the bottom off, you will find a very big screw very near to the teeth, slacken that screw and you can raise the teeth, the teeth should only comne just above the needle plate.

drivewithken, July 2010