How do i replace the drum bearing on my Hotpoint WM52 first edition 1000 washing machine

Bill Tweedale, June 2006

you can buy the bearings seperate. you need to remove the lid then the dispenser draw and the screws around it this will loosen the control panel youll see 3 screws underneath that and 3 on the bottom holding the front plate on unclip the seal and remove front then remove all small clips holding plastic front on the tub. to remove the drum remove nut and wheel on back of tub and pull out you will see the bearings there. easiest way to remove is to use a bearing removal kit.

daz, June 2006