Liam asked ... Belts for old WEBB Mower?    |    Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Click here to ask your question

Indesit IWDE12 not drying/lights flashing?

I have an Indesit IWDE12 washer/dryer that has recently starting playing up. When you select a drying programme it starts of normally but after a while it stops drying. The clothes inside are hot and wet, so the heating element is working and i have checked the fan is working ok. When it stops working the following lights on the front start flashing. delay start, iron dry and spin speed all flash at the same rate. the door lock light flashes twice as fast as the others. I have checked the drain pipe which is clear, i have removed the pump and checked that it is clear and i have checked the pipe from the drum to the pump which is clear. I think the flashing lights are a fault code but i can't find any details of these anywhere.
Any help would be greatly appreciated.
Derek., August 2010
where is the fluff filter - I have the same problem

Fran, March 2011
whare is the filter

john, February 2011
Many thanks Wash Doc
I removed the fluff filter and cleared it all out. the dryer now works perfectly.
Thanks again

Derek, August 2010
f13 dryer ntc. could be restricted air flow most likely condenser full of fluff

wash doc, August 2010
link Click here to see other fixes for Indesit.