When the washer begins to fill with water on some programs it continues filling and I have to turn it off. This is most noticable on E & F

Rob, September 2010

I have fixed it myself , it was the filter at the rear of the machine. I took off the small panel off at the bottom and removed the filter housing and cleaned the filter. I took all of ten mins.

Rob, September 2010

sounds like you have a blockage in the pressure system,its a small bottle like object with a thin hose running up to the pressure switch,all you have to do is clean it out,its held on with three screws,before you work on the machine,remove the plug from the socket,dont just turn the switch off,if you take the top off,you will see the hose ,look for it near the top right hand side of the machine,it will run down to the pressure chamber,

gts, September 2010