andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

boiler works for a short period?

i have a worcester 28si mark 2 it fires up on hot water or central heating and works fine for a while then cuts out it tries to reignite but no joy then it will not reignite for about another half hour have taken the front panel off control panel area and have noticed there are 2 relays soldered onto control panel just under st1 connection when it ignites you get green flash from relays when the fault occurs the left relay seems to arc out inside, the other symptom seems to be looking through the viewing on combustion chamber have noticed that there is good flame but then the flame seems to die from the left of burner to the right
john, September 2010
common fault pcb relay.
the reason the flame goes out is the relay controls the fan and the relay fails in operation and the fan stops.changed a pcb yesterday for same fault.

fourways gas, September 2010
Suspect partially/blocked condense

Carefree, September 2010
link Click here to see other fixes for Worcester 28SI Mark 2.