Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

zanussi washer/dryer not working?

I have a zanussi hydrosystem washer dryer
model ZWD 1251 W
It stopped working during a wash-towards the end then just stopped doing anything but the timer still carried on counting down towards 0, then it jumped back up to 122 mins but still wasnt doing anything then jumped forward to 10 mins!
I had to try different programs-resetting it-to get it to drain and open the door.
Now it wont do anything but the dryer still works so the drum will turn?????
Ive cleaned the filter and drained it manually but nothing helps.
Im at my wits end as have little ones and teens and live miles away from a laundrette!
any ideas anyone?
Debs, September 2010
I cleaned out the filter and it seemed ok.
Some one checked the pipes at back for me and tightened something up as they said there was a slight leak, when I tried a wash cycle only a trickle of water went into the wash dawer and none in the drum.
Ive tried it again and now no water enters the drawer or drum?

Debs, September 2010
if it doesn't drain (fill with water and then select a drain program to test) you might have a faulty drain pump or something jammed in the impellor.

ck, September 2010
link Click here to see other fixes for Zanussi.