andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

how to get inside stannah to replace batteries?

stannah GLS 250 goes up track about 1 metre then stops. i guess this is the batteries, cut out perhaps by some smart electronics. How do i get in to check the batteries and make visual check for obvious mechanical faults?
wisebear the noo, October 2010
hi.........on the 250sl you have side covers on the main carriage x 2, held by 2 x philip screws at bottom on each........depending on your s/l being l/h or r/h on stairs ,you will find behind one cover 2 x 12v batteries held by a zinc plate which also needs to be taken out to remove batteries/test..[must turn the carriage isolator switch on front of carriage off before removing batteries] behind the other carriage cover is the main pcb which i would leave alone until you have tested the batteries as these do need replacing....hoped this has helped.........regards

IAN, March 2011
link Click here to see other fixes for Stannah GLS 250.