Help With BT Synergy 2150 Dect Phones
26 Aug
2008361
ViewsHelp with BT Synergy 2150 dect phones.
Has your synergy 2150 just started randomly displaying "Searching" on the display, even when the handset is sat in the cradle?
When this happens try a "reset" to the handset and the base station by taking the batteries out of the handset and turning off the power to the base. Leave them in the power-off position for at least 30 seconds before powering them again. If this does not fix your problem than your system is aging and most like the RF shielding cans on the handset (or base) is corroding (or dry solder joints). If this fixes the problem, then simply
repeat this procedure whenever the problem manifest.
If this does not fix your problem try a” hard reset”
1. Turn off the mains power.
2. Press the 'page' button and power on whilst pressing the
'page' button. Keep holding the button after power on until base starts bleeping
3. Release the 'page button when the base unit stops bleeping.
4. Press the page button five times in quick succession.
5. That's it ! Full factory reset completed.
Tags: Help, BT, Synergy 2150, Dect, Phones
Viccyb, December 2008