I have checked to see if there is a filter that might be blocked but there is no filter. Do you know what possible reasons there could be for the machine not spinning?
The door seal was torn but I have replaced that today and it has made not difference.
If there is a filter on this machine can you tell me where it is?

Frazer Russell, December 2004

I think this would be a "card" failure as opposed to a filter. I had the same problem previously on an Indesit - it would go through every program and do every single function apart from spin. The card on the Indesit was located towards the bottom of the machine - selection of the correct card was pure luck I'm afraid, but with the card number I was able to purchase a replacement from a spares dealer for £17, and fitting was simple, as the cards merely slot in and out. I know have the very same problem with my Machine now - a Creda 1200 Superspin: I will be attempting to repeat the repair procedure, and will update once attempted!

Brian Humphries, January 2005