Hi
It's a m30100 and there is no display on the control pannel. The presure in the rads had droped too low but is now correct but still no life. The power led in the on/off switch works but thats it.
Help please.
E-Mail bts4262@hotmail.com

Alan Hopper, December 2004

If the light on the power button comes on and there is no LED display then it will need either a new control panel for around £60 (which just plugs in) or more likely a new PCB which will cost you around £200 (again you could easily fit it yourself).

I had the same and replaced both as per ideal....mine still doesn't work though and it's the 3rd time it has broken down in 2.5yrs....I now have a flashing L and F error message!

Good luck!

Dave, December 2005

try looking for a reset button that may be underneath or inside , they are sometimes not labelled and just look like a little red button

steve, December 2004