Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Click here to ask your question

ford transit swb 280 td 51 plate?

my gear lever feels jammed i was coming off motorway and tried to drop down into 4th gear and it would not go the only thing it would do is go back in 5th or pull out of gear can anyone help please
jimmy, November 2010
i did the gearbox how you told me and you were spot on .now its like having a brand new gearbox many thanks c.d.c and it only cost £11.00 for a seal and gear oil

jimmy, December 2010
disconnect cables at selectors on g.box and see if this frees up the gearlever,if so,there are two needle roller bearings in selector mechanism on g/box which seize up causing problems you describe,remove the six 10mm bolts holding on the selector cover on,disconnect rev,light wiring and remove the cover,inside here are the bearings and you also need the top oil seal,strip down taking careful note and rebuild with plenty of grease and lubrication on the selector shafts,hope this helps,good luck

cdc, November 2010
link Click here to see other fixes for Ford Transit.