Hi, I have a New Home 632 which has never behaved well since I was given it. Gradually, it has become worse and worse for skipping stitches, breaking needles, jamming up with bunches and bunches of the lower thread wedged underneath the needle plate. I have fiddled with both the top thread and bobbin tensions, and cleaned and oiled the machine. This hasn't helped, and I think this just leaves the timing. I've seen general guidance for how to set this on most machines, but I can't find anything specific to this model. Any body know what sort of distance between the hook and the needle's eye I should be starting off with?

Stevo, November 2010

Hi
I have the same problem as you had last year with your Newhome 632 sewing machine.
I see that you got a reply & wondered if there was anything you could pass on to me that might help.

Hope you can help, if you can I will send you my email address.

Many thanks

Ann, October 2011

Hello Stevo,
You will need to type my address as you say it not as you see it and email me so I can attach instructions.
Ken

kendourof at yahoo dot com, November 2010