Hi can anyone help me i have an hover hnl 6166 front loading washing machine and my wife put a washing load in and went to switch it on and there was no power.
I have checked the fuse thats fine it is a sealed plug and the washing machine is always in one place so its not been pulled about any suggestions please thanks mark.

mark, December 2010

if you can get a volt meter take lid off put meter on "v" volts put red on live. black on neutral on the interference filter "like a box the wires go in" .Be carefull not to touch the connectors. Turn on and see if you have power coming in meter will show a reading uk 230ish. if no replace power lead and plug ect. if yes make sure door is fully locked give it a good slam should start up check all wires near bottom of machine for damage mice often chew them ect hope it helps..could try a door lock mech also cheers Mr Whitegoods

jez1973, December 2010